Frequently Asked Questions

Solar

Solar projects are often designed to complement rural landscapes by providing landowners with predictable income while requiring minimal long-term disruption to the land. In many cases, the land can support compatible uses such as planting pollinator habitats or grazing livestock between the rows of panels. This approach, called “dual use” or agrivoltaics, can maintain or even enhance the productivity of the site while supporting clean energy goals.

We evaluate many factors when selecting a site, including solar resource quality, proximity to transmission infrastructure, topography, and environmental suitability. While land use varies by region, projects are often sited on open, underutilized, or lower-quality land that may not be ideal for growing crops. Projects must also comply with all local zoning, permitting, and environmental review requirements.

No, solar panels are sealed units made primarily of glass, aluminum, and silicon-based materials. They do not release toxins during normal operation. Solar facilities don’t produce emissions or wastewater, and panels are typically installed on pilings that minimize soil disturbance. Projects are also subject to Federal, State, and local environmental permitting that ensures protection of water resources and nearby ecosystems.

Resource: U.S. EPA - Solar Panel Recycling

Resource: NC State University: Health and Safety Impacts of Solar Photovoltaics

Solar facilities do not significantly change the temperature of surrounding areas. In fact, vegetation planted beneath the panels can help maintain cooler ground temperatures. As for glare, panels are designed to absorb sunlight , not reflect it. This makes them less reflective than many windows or car windshields. Aviation authorities, such as the FAA, have studied and approved solar facilities near airports due to their low glare risk.

Resource: FAA - FAA Issues Policy on Solar Projects on Airports

When thoughtfully designed, solar facilities can support biodiversity. Many projects incorporate native vegetation and avoid disrupting sensitive habitats. Fencing is used to keep larger animals out for safety, but projects often include wildlife corridors or gaps for smaller species. As a developer, we also consult with environmental experts to minimize potential impacts and meet local or federal wildlife protection standards.

Because solar facilities typically use pile-driven foundations, the land remains largely permeable. Grass or ground cover is planted beneath the panels to reduce erosion and allow for natural water absorption. Projects often include stormwater management plans which are reviewed and approved by local regulators to ensure runoff is safely handled and nearby waterways are protected.

Yes. Solar panels generate electricity even when it’s cloudy, just at reduced output. In snowy regions, panels are angled to shed snow quickly, and sunlight reflecting off snow can sometimes improve performance. Cold temperatures also improve panel efficiency, meaning solar continues to operate reliably year-round.

Solar panels are tested to withstand hail and certified under national durability standards. They’re built with tempered glass similar to car windshields and are angled to deflect most hail impacts. Additionally, system operators monitor weather forecasts and can take protective actions, like adjusting power output or shutting down components, during extreme conditions. 

If a severe weather event occurs, trained personnel are dispatched to the site quickly to assess any damage and implement corrective measures, ensuring the system and site remains safe and functional.

Solar panels themselves are silent. The only operational noise comes from inverters or transformers, which emit a low hum which is typically inaudible beyond the fence line. Inverters typically only operate during the day and are located central to the solar facility. Electromagnetic fields (EMFs) around solar facilities are extremely low and fall well below international health standards, similar to those produced by common household appliances.

Resource: NC State University: Health and Safety Impacts of Solar Photovoltaics

Even if the electricity flows to a regional grid, solar projects bring tangible local benefits. These may include lease payments to landowners, increased property tax revenue for local governments, and new jobs during construction and maintenance. Many communities also appreciate contributing to cleaner air, grid reliability, and energy independence.

Multiple studies across the U.S. have found that proximity to solar facilities does not negatively affect property values. In fact, solar projects are quiet, low-traffic neighbors with low visual impact, especially when buffered by fencing or landscaping. Local governments often require visual screening to ensure projects blend into their surroundings. Various studies have drawn conclusions, confirmed by county assessors around the country, about a lack of impacts in their respective counties regarding harmful property value impacts. 

Resource: SEIA: Solar & Property Value
Resource: Cohn Reznick Property Value Impact Study 2018 for Kendall County

Resource: Solar Farms Don’t Hurt Nearby Property Values, New Research Finds

Yes, solar panels and their supporting infrastructure can be removed and recycled at the end of a project’s life – usually 30 to 35 years. Most solar components, including glass and metal framing, are recyclable, and recycling options continue to grow. Developers are typically required to create and fund a decommissioning plan as part of project approval to ensure safe removal and site restoration.

Resource: U.S. EPA - Solar Panel Recycling

Resource: ACP - What Happens When a Solar Facility is Decommissioned?

BESS

A BESS stores electricity for use at a later time, helping to balance energy supply and demand. These systems are especially valuable for storing renewable energy, such as solar or wind, so it can be used when the sun isn't shining or the wind isn’t blowing. By doing so, BESS improves grid stability, supports clean energy goals, and reduces reliance on single energy sources.

A BESS typically consists of rechargeable batteries housed in enclosures or containers. These batteries charge when excess electricity is available and discharge power back to the grid when demand is high. A control system manages this process, optimizing performance and ensuring safety.

Thermal runaway is a rare condition where a battery cell overheats and potentially ignites. To prevent this, BESS units are equipped with Battery Management Systems (BMS) that constantly monitor temperature, voltage, and other conditions. If an abnormality is detected, the system can isolate or shut down affected components. Fire-resistant enclosures, gas venting systems, and remote monitoring add further protection.

 

Resource: NFPA - Energy Storage Systems (ESS) and Solar Safety

Resource: ACP - Battery Storage Industry Unveils National Blueprint for Safety

Resource: University of Michigan: Planning and Zoning for BESS

Most utility-scale BESS installations use modular enclosures that resemble large shipping containers, typically 20 to 53 feet in length. These are installed on gravel or concrete pads, surrounded by fencing, and can be screened with landscaping or decorative fencing to better match surrounding land uses.

BESS facilities are designed for safe, low-impact operation. The systems are enclosed, fenced, and operate without emissions or significant noise beyond the site. They are sited in accordance with national fire codes as well as applicable state and local regulations, which define setbacks from neighboring properties to ensure public safety.

 

In rare cases such as a fire, the system is designed to contain the event, and local responders may issue a temporary “shelter in place” advisory as a precaution which is a similar scenario to any structure fire. Ecoplexus partners with local agencies to develop site-specific Emergency Response Plans and provide first responder training to further minimize risk.

All fires produce smoke that can be hazardous to inhale, and BESS fires are no exception. However, these events are rare and contained within the system’s enclosures. Fire departments are trained on how to respond to such incidents and are provided with site-specific emergency plans. Public safety is the top priority during any response.

Most BESS installations are designed to last 15–20 years. After this, components can be removed, replaced, or repurposed. Battery cells and other system parts are increasingly recyclable, and the recycling infrastructure is improving as the industry grows.

While the battery units themselves are silent, BESS facilities can generate sound from cooling systems such as fans, chillers, or HVAC equipment. Noise levels vary based on site design, topography, ambient temperature, system size, power output, equipment type, and distance from the facility.

All systems are designed to comply with local noise regulations, and sound typically decreases significantly beyond the site boundary.

Yes. BESS containers are weather-sealed and built to withstand local environmental conditions, including heat, cold, wind, and precipitation. In areas at risk of flooding, systems are installed above flood elevation levels or on raised platforms to protect equipment and prevent environmental exposure.

BESS projects are remotely monitored around the clock and undergo regular on-site inspections by trained technicians. Maintenance includes performance checks, software updates, and replacement of components like filters or fans to ensure long-term safety and reliability.

Yes. Modern BESS installations are designed with multiple safety layers, including fire detection and suppression systems, temperature and gas monitoring, and automatic shutoff controls. These systems are engineered to contain and isolate potential issues, ensuring safe, controlled performance even in rare fault scenarios.

 

Battery energy storage systems must comply with rigorous national safety codes, including:

 

  • NFPA 855, the leading standard for the installation of stationary energy storage systems, which governs design, siting, spacing, and safety features.
  • NFPA 68, which addresses deflagration venting, and NFPA 69, which provides guidance on explosion prevention. Both are critical in ensuring safe pressure relief and gas management within battery enclosures.

 

Ecoplexus works closely with local emergency responders and permitting authorities to develop Emergency Response Plans (ERPs) tailored to each site. We may conduct Hazard Mitigation Analyses (HMAs) as part of project planning and permitting. These tools ensure first responders are informed, trained, and equipped to respond in the unlikely event of an incident.

 

Resource: NFPA - Energy Storage Systems (ESS) and Solar Safety

Resource: ACP - Battery Storage Industry Unveils National Blueprint for Safety

Resource: University of Michigan: Planning and Zoning for BESS

BESS components are manufactured and assembled globally, including in the U.S., South Korea, Japan, Europe, and China. Final system integration, testing, and commissioning are often completed domestically to meet project-specific and regulatory requirements.

Most utility-scale BESS projects today use lithium-ion batteries, with lithium iron phosphate (LFP) being one of the most common chemistries due to its strong thermal stability, long cycle life, and favorable safety profile. Other key system components such as inverters, transformers, and enclosures also come from a diverse domestic and international supply chain.

Yes. BESS projects can create construction and maintenance jobs, generate local tax revenue, and support the integration of renewable energy which leads to cleaner air and more reliable electricity. In some cases, these systems are paired with solar facilities, creating additional community benefits.

BESS helps utilities respond to fluctuating energy demand, maintain reliability during outages or weather events, and reduce the need for fossil fuel “peaker plants.” They are a vital part of the modern, resilient, and low-carbon grid.